Update Hyprland dotfiles

UserConfigs/01-UserDefaults.conf

@@ -11,8 +11,8 @@
 $edit=${EDITOR:-nano}
 
 # These two are for UserKeybinds.conf & Waybar Modules
-$term = kitty # Terminal
+$term = alacritty # Terminal
 $files = thunar # File Manager
 
 # Default Search Engine for ROFI Search (SUPER S)
-$Search_Engine = "https://www.google.com/search?q={}"
+$Search_Engine = "https://www.google.com/search?q={}"

UserConfigs/ENVariables.conf

@@ -37,8 +37,8 @@ env = QT_SCALE_FACTOR,1
 # Bibata-Modern-Ice-Cursor
 # NOTE! You must have the hyprcursor version to activate this.
 # https://wiki.hyprland.org/Hypr-Ecosystem/hyprcursor/
-#env = HYPRCURSOR_THEME,Bibata-Modern-Ice
-#env = HYPRCURSOR_SIZE,24
+env = HYPRCURSOR_THEME,Bibata-Modern-Ice
+env = HYPRCURSOR_SIZE,48
 
 # firefox
 env = MOZ_ENABLE_WAYLAND,1
@@ -51,39 +51,39 @@ env = ELECTRON_OZONE_PLATFORM_HINT,auto # auto selects Wayland if possible, X11
 # This is from Hyprland Wiki. Below will be activated nvidia gpu detected
 # See hyprland wiki https://wiki.hyprland.org/Nvidia/#environment-variables
 
-env = LIBVA_DRIVER_NAME,nvidia
-env = __GLX_VENDOR_LIBRARY_NAME,nvidia
-env = NVD_BACKEND,direct
-env = GSK_RENDERER,ngl
+#env = LIBVA_DRIVER_NAME,nvidia
+#env = __GLX_VENDOR_LIBRARY_NAME,nvidia
+#env = NVD_BACKEND,direct
+#env = GSK_RENDERER,ngl
 
 # additional ENV's for nvidia. Caution, activate with care
-env = GBM_BACKEND,nvidia-drm
+#env = GBM_BACKEND,nvidia-drm
 
-env = __GL_GSYNC_ALLOWED,1 #adaptive Vsync
-env = __NV_PRIME_RENDER_OFFLOAD,1
-env = __VK_LAYER_NV_optimus,NVIDIA_only
-env = WLR_DRM_NO_ATOMIC,1
+#env = __GL_GSYNC_ALLOWED,1 #adaptive Vsync
+#env = __NV_PRIME_RENDER_OFFLOAD,1
+#env = __VK_LAYER_NV_optimus,NVIDIA_only
+#env = WLR_DRM_NO_ATOMIC,1
 
 # FOR VM and POSSIBLY NVIDIA
 # LIBGL_ALWAYS_SOFTWARE software mesa rendering
-env = LIBGL_ALWAYS_SOFTWARE,1 # Warning. May cause hyprland to crash
-env = WLR_RENDERER_ALLOW_SOFTWARE,1
+#env = LIBGL_ALWAYS_SOFTWARE,1 # Warning. May cause hyprland to crash
+#env = WLR_RENDERER_ALLOW_SOFTWARE,1
 
 # nvidia firefox (for hardware acceleration on FF)?
 # check this post https://github.com/elFarto/nvidia-vaapi-driver#configuration
-env = MOZ_DISABLE_RDD_SANDBOX,1
-env = EGL_PLATFORM,wayland
+#env = MOZ_DISABLE_RDD_SANDBOX,1
+#env = EGL_PLATFORM,wayland
 
 #### Aquamarine Environment Variables #### ( Hyprland > 0.45 )
 # https://wiki.hyprland.org/Configuring/Environment-variables/#aquamarine-environment-variables----ref-httpsgithubcomhyprwmaquamarineblobmaindocsenvmd---
- env = AQ_TRACE,1 # Enables more verbose logging.
- env = AQ_DRM_DEVICES,/dev/dri/card1:/dev/dri/card0 # Set an explicit list of DRM devices (GPUs) to use. It’s a colon-separated list of paths, with the first being the primary. E.g. /dev/dri/card1:/dev/dri/card0
- env = AQ_MGPU_NO_EXPLICIT,1 # Disables explicit syncing on mgpu buffers
- env = AQ_NO_MODIFIERS,1 # Disables modifiers for DRM buffers
+# env = AQ_TRACE,1 # Enables more verbose logging.
+# env = AQ_DRM_DEVICES,/dev/dri/card1:/dev/dri/card0 # Set an explicit list of DRM devices (GPUs) to use. It’s a colon-separated list of paths, with the first being the primary. E.g. /dev/dri/card1:/dev/dri/card0
+# env = AQ_MGPU_NO_EXPLICIT,1 # Disables explicit syncing on mgpu buffers
+# env = AQ_NO_MODIFIERS,1 # Disables modifiers for DRM buffers
 
 #### Hyprland Environment Variables ####
 # https://wiki.hyprland.org/Configuring/Environment-variables/#hyprland-environment-variables
- env = HYPRLAND_TRACE,1 # Enables more verbose logging.
- env = HYPRLAND_NO_RT,1 # Disables realtime priority setting by Hyprland.
- env = HYPRLAND_NO_SD_NOTIFY,1 # If systemd, disables the 'sd_notify' calls.
- env = HYPRLAND_NO_SD_VARS,1 # Disables management of variables in systemd and dbus activation environments.
+# env = HYPRLAND_TRACE,1 # Enables more verbose logging.
+# env = HYPRLAND_NO_RT,1 # Disables realtime priority setting by Hyprland.
+# env = HYPRLAND_NO_SD_NOTIFY,1 # If systemd, disables the 'sd_notify' calls.
+# env = HYPRLAND_NO_SD_VARS,1 # Disables management of variables in systemd and dbus activation environments.

UserConfigs/Startup_Apps.conf

@@ -57,3 +57,6 @@ exec-once = swww img $HOME/Pictures/wallpapers/mecha-nostalgia.png  # persistent
 
 # xdg-desktop-portal-hyprland (should be auto starting. However, you can force to start)
 #exec-once = $scriptsDir/PortalHyprland.sh
+
+# Autostart Vesktop
+#exec-once = vesktop

hyprland.conf

@@ -5,6 +5,11 @@
 # Autostart gnome-keyring-daemon
 exec-once = /usr/bin/gnome-keyring-daemon --start --components=pkcs11,secrets,ssh
 
+debug {
+  enable_stdout_logs = true
+  # log_level = LOG_TRACE
+}
+
 
 # Initial boot script enable to apply initial wallpapers, theming, new settings etc.
 # suggest not to change this or delete this including deleting referrence file in ~/.config/hypr/.initial_startup_done
@@ -44,4 +49,4 @@ source= $UserConfigs/01-UserDefaults.conf # settings for User defaults apps
 
 # nwg-displays
 source= $HOME/.config/hypr/monitors.conf
-source= $HOME/.config/hypr/workspaces.conf
+source= $HOME/.config/hypr/workspaces.conf